:Select Station/10/en

From meteobridge
Revision as of 16:41, 9 December 2015 by FuzzyBot (Talk | contribs) (Importing a new version from external source)

Jump to: navigation, search

Pressure Correction

In this field you can add an offset to be applied to station pressure in order to calibrate pressure measurements. Offset can be specified in mbar/hPa or inHg, according to the unit you select with the drop-down box on the right. Offset will be applied on top of altitude-based pressure corrections. The example adds 0.1 hPa to the sensor value.