Difference between revisions of "Home"
|Line 1:||Line 1:|
Revision as of 00:15, 21 February 2013
Resellers in US and Europe do offer fully licensed Meteobridge solutions "ready-to-go". Please checkout Where to Buy?
What is "Meteobridge"?
Meteobridge is a small device that connects your personal weather station to public weather networks like "Weather Underground". This allows you to feed your micro climate data to a weather network in the Internet and to have it there visible from wherever you are. All you need is Internet access, to reach the weather networks's web pages, where you can inspect your current and historical data. By that you can also share your weather data with friends and you are actively participating in a large network of weather enthusiasts who also share their weather observations with you.
Picture below shows how your weather station gets connected to Weather Underground with the help of Meteobridge, which bridges the gap between your weather station and your router.
When you like check how the web interface of Meteobridge device looks like, you are welcome to the cloud simulator service: www.meteobridge.com This is a Meteobridge ported into a cloud service to play with its web interface. Upload functions and data logging is not working here, also some system interactions (reboot, etc) are not implemented. Have fun setting up a Meteobridge before you even have one ;-)
Why don't you take a regular PC for this?
Of course, instead of using a Meteobridge device, you can also connect your weather station to a PC and install SW there that uploads data to a weather network. Many people do that, but it demands you to
- run a PC 24/7 which adds energy costs, heat and noise and beside cost is also an unpleasant waste of energy, which is not so nice, when you care about the environment
- install and configure SW on the PC, setup is not something done in 5 minutes
- take care of your pc really running undisturbed 24/7, which is normally not the case for an office-like PC
To overcome these disadvantages of a PC solution, meteobrigde steps in by providing a very cost effective solution with unmatched low demand of energy (below 2 watts) and without generating noise or significant heat. As Meteobrige does not fulfill demands of true weather enthusiasts, who want all data stored locally and doing their own graphing of that, it is extremely simple to set up and will run completely hassle-free. Just install it in a few minutes and then totally forget about it. You will not find a smaller, easier to use upload device for Weather Underground.
What makes Meteobridge special?
The idea lined out above is very easy so you might ask, why hasn't something like that been created before. To make this idea work you need a cheap platform, powerfull enough to run such code plus a development environment to put the application code on top and you need application code that supports a lot of weather stations, to make it a solution suitable to a broad range of customer situations. Recently, these building blocks have come together:
- small and cheap router devices from TP-LINK building the HW platform
- a stable OpenWrt Linux port for this hardware which supports LAN and WLAN
- application software stack from smartbedded which is also used and tested with Meteoplug devices (www.meteoplug.com)
Simply speaking, Meteobrige is bringing these building blocks together and focussing it to the specialized purpose to feed Internet weather networks with your weather station's data.