Difference between revisions of ":Preparing Hardware/39/en"
From meteobridge
(Importing a new version from external source) |
(Importing a new version from external source) |
||
| Line 1: | Line 1: | ||
==Flashing Meteobridge Firmware to TL-MR3020 (version 3.x)== | ==Flashing Meteobridge Firmware to TL-MR3020 (version 3.x)== | ||
| − | Flashing of version 3 model cannot be done by the web interface of the TP-Link stock firmware, because the web interface accepts firmware images digitally signed by TP-Link only. Therefore, you need to setup a TFTP server on your PC, give your PC the IP 192.168.0.225 and store the Meteobridge firmware image [http://connect.meteobridge.com/files/meteobridge-tl-mr3020v3-v1. | + | Flashing of version 3 model cannot be done by the web interface of the TP-Link stock firmware, because the web interface accepts firmware images digitally signed by TP-Link only. Therefore, you need to setup a TFTP server on your PC, give your PC the IP 192.168.0.225 and store the Meteobridge firmware image [http://connect.meteobridge.com/files/meteobridge-tl-mr3020v3-v1.3.bin meteobridge-tl-mr3020v3-v1.3.bin] renamed to "tp_recovery.bin" into the TFTP folder of your server. |
Revision as of 20:08, 26 March 2018
Flashing Meteobridge Firmware to TL-MR3020 (version 3.x)
Flashing of version 3 model cannot be done by the web interface of the TP-Link stock firmware, because the web interface accepts firmware images digitally signed by TP-Link only. Therefore, you need to setup a TFTP server on your PC, give your PC the IP 192.168.0.225 and store the Meteobridge firmware image meteobridge-tl-mr3020v3-v1.3.bin renamed to "tp_recovery.bin" into the TFTP folder of your server.
