Difference between revisions of ":Preparing Hardware/40/en"

From meteobridge
Jump to: navigation, search
(Importing a new version from external source)
 
(Importing a new version from external source)
 
Line 4: Line 4:
 
* connect the MR3020 to power (keep the button pressed)
 
* connect the MR3020 to power (keep the button pressed)
 
* wait 10 seconds an then release the button
 
* wait 10 seconds an then release the button
−
Now the MR3020 is flashed to Meteobridge. When everything works fine the MR3020 will start blinking slowly with the large LED after a while, will then start fast blinking and will end up with the large LED steady on after about 2 minutes. Then you are done.
 

Latest revision as of 20:16, 27 March 2018

Having done that flashing the device is very simple:

  • Connect the MR3020v3 with an Ethernet cable to the same LAN your TFTP server is in
  • then press the large button on the top of the MR3020v3 and keep it pressed
  • connect the MR3020 to power (keep the button pressed)
  • wait 10 seconds an then release the button
Retrieved from "http://www.meteobridge.com/wiki/index.php?title=:Preparing_Hardware/40/en&oldid=6946"