Difference between revisions of ":Preparing Hardware/39/en"

From meteobridge
Jump to: navigation, search
(Importing a new version from external source)
 
(Importing a new version from external source)
Line 1: Line 1:
 
==Flashing Meteobridge Firmware to TL-MR3020 (version 3.x)==
 
==Flashing Meteobridge Firmware to TL-MR3020 (version 3.x)==
Flashing of version 3 model cannot be done by the web interface of the TP-Link stock firmware, because the web interface accepts firmware images digitally signed by TP-Link only. Therefore, you need to setup a TFTP server on your PC, give your PC the IP 192.168.0.225 and store the Meteobridge firmware image [http://connect.meteobridge.com/files/meteobridge-tl-mr3020v3-v1.1.bin meteobridge-tl-mr3020v3-v1.1.bin] renamed to "tp_recovery.bin" into the TFTP folder of your server.
+
Flashing of version 3 model cannot be done by the web interface of the TP-Link stock firmware, because the web interface accepts firmware images digitally signed by TP-Link only. Therefore, you need to setup a TFTP server on your PC, give your PC the IP 192.168.0.225 and store the Meteobridge firmware image [http://connect.meteobridge.com/files/meteobridge-tl-mr3020v3-v1.3.bin meteobridge-tl-mr3020v3-v1.3.bin] renamed to "tp_recovery.bin" into the TFTP folder of your server.

Revision as of 19:08, 26 March 2018

Flashing Meteobridge Firmware to TL-MR3020 (version 3.x)

Flashing of version 3 model cannot be done by the web interface of the TP-Link stock firmware, because the web interface accepts firmware images digitally signed by TP-Link only. Therefore, you need to setup a TFTP server on your PC, give your PC the IP 192.168.0.225 and store the Meteobridge firmware image meteobridge-tl-mr3020v3-v1.3.bin renamed to "tp_recovery.bin" into the TFTP folder of your server.