Difference between revisions of ":Preparing Hardware/2/en"

From meteobridge
Jump to: navigation, search
(Bezig met het importeren van een nieuwe versie uit een externe bron)
 
(Importing a new version from external source)
Line 1: Line 1:
 
==Flashing Meteobridge Firmware to TL-MR3020==
 
==Flashing Meteobridge Firmware to TL-MR3020==
−
Please consult the TP-Link manual to understand how to get access with your browser to its web interface. What the manual will tell you is basically that you have to connect your PC/Laptop via Ethernet cable, and log in to the router's web interface (IP is 192.168.0.254, login name is "admin", password: "admin").
+
<font color=red>Warning: Meteobridge image does only support MR3020 hardware version 1.x. The new version 3 which can currently be found in Asia is not supported by Meteobridge. Please stay away from these V3 models. V3 models are advertised with 300 Mbit/s WiFi and are labeled V3 at the sticker of the back of the unit.</font>
−
When you have access to web interface of TL-MR3020, overwrite factory firmware like a regular firmware update by [http://www.meteohub.de/files/meteobridge-tl-mr3020-v1.4.bin meteobridge-tl-mr3020-v1.4.bin]. Wait until unit restarts. After that it will be a Meteobridge client in standard configuration receiving an IP via DHCP from your router in the LAN.
+

Revision as of 11:02, 21 January 2018

Flashing Meteobridge Firmware to TL-MR3020

Warning: Meteobridge image does only support MR3020 hardware version 1.x. The new version 3 which can currently be found in Asia is not supported by Meteobridge. Please stay away from these V3 models. V3 models are advertised with 300 Mbit/s WiFi and are labeled V3 at the sticker of the back of the unit.

Retrieved from "https://www.meteobridge.com/wiki/index.php?title=:Preparing_Hardware/2/en&oldid=6478"